NetBSD on SHARP PC-GP1-C7U

ここ、 SHARP メビウス PC-GP1-C7U/C7H/C7M

acpiを有効化しないと、内蔵USB(1.1)もCardBusも挙動がおかしいという 不思議なマシン。PCMCIAならacpiなしで使えたけど。てことで、 kernel config は、GENERIC_LAPTOPから acpi 関連をONにしたものでOK。

dmesgはこんな感じ。CardBusのUSB2を突っこんだ状態。

NetBSD 3.0_STABLE (DRAGONS) #10: Mon Jul 10 15:39:50 JST 2006
	root@dragons.yk.gentei.org:/sys/arch/i386/compile/DRAGONS
total memory = 495 MB
avail memory = 479 MB
BIOS32 rev. 0 found at 0xe99c0
PCI BIOS rev. 2.1 found at 0xe99d4
PCI IRQ Routing Table rev. 1.0 found at 0xfe840, size 128 bytes (6 entries)
PCI Interrupt Router at 000:17:0 (VIA Technologies VT8231 IDE Controller compatible)
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon 4 Processor (686-class), 1196.41 MHz, id 0x662
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "Mobile AMD Athlon(tm) 4 Processor"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <OID_00,RSDT_000,30303030>, AslId <  M^P&,00010007>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C0D at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A): ACPI Battery (Control Method)
PNP0A03 at acpi0 not configured
PNP0F03 at acpi0 not configured
PNP0320 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0400 at acpi0 not configured
PNP0C09 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 (Apollo KT133) Host Bridge (rev. 0x80)
agp0 at pchb0: aperture at 0xa0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 (Apollo KT133) PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 product 0x8d02 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 8 function 0: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci0 dev 8 function 1: Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
NEC uPD72871 IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x01) at pci0 dev 11 function 0 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8231 IDE Controller (rev. 0x10)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8231 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 17 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1e)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1e)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT8231 Power Management Controller (miscellaneous bridge, revision 0x10) at pci0 dev 17 function 4 not configured
auvia0 at pci0 dev 17 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 0x40)
auvia0: interrupting at irq 5
auvia0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
auvia0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous communications, revision 0x20) at pci0 dev 17 function 6 not configured
VIA Technologies VT6102 (Rhine II) 10/100 Ethernet (ethernet network, revision 0x51) at pci0 dev 18 function 0 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wi0 at pcmcia1 function 0: <Geowave, GW-NS11S, Version 01.02, >
wi0: 802.11 address 00:90:cc:25:c3:e9
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ohci0 at cardbus0 dev 0 function 0: NEC USB Host Controller (rev. 0x43)
ohci0: interrupting at 11
ohci0: OHCI version 1.0
usb2 at ohci0: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci1 at cardbus0 dev 0 function 1: NEC USB Host Controller (rev. 0x43)
ohci1: interrupting at 11
ohci1: OHCI version 1.0
usb3 at ohci1: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at cardbus0 dev 0 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 5 ports with 5 removable, self powered
wd0 at atabus0 drive 0: <HITACHI_DK23DA-40>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA720 DVD/CDRW, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

叱咤激励感想ツッコミはゲストブック

Generated with mkdiary.rb
yuuji@gentei.org
Fingerprint16 = FF F9 FF CC E0 FE 5C F7 19 97 28 24 EC 5D 39 BA
HIROSE Yuuji - ASTROLOGY / BIKE / EPO / GUEST BOOK / YaTeX [Tweet]