NetBSD 3.0_STABLE (Y1) #24: Mon Jun 12 21:38:30 JST 2006 root@minica.is.koeki-u.ac.jp:/sys/arch/i386/compile/Y1 total memory = 702 MB avail memory = 681 MB BIOS32 rev. 0 found at 0xfd550 PCI BIOS rev. 2.1 found at 0xfd7bd pcibios: config mechanism [1][x], special cycles [x][x], last bus 8 PCI IRQ Routing Table rev. 1.0 found at 0xfde70, size 320 bytes (18 entries) PCI Interrupt Router at 000:20:3 (ATI Technologies product 0x436c compatible) mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium M (Dothan) (686-class), 1396.02 MHz, id 0x6d8 cpu0: features afe9fbff cpu0: features afe9fbff cpu0: features afe9fbff cpu0: "Intel(R) Celeron(R) M processor 1.40GHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: using thermal monitor 1 acpi0 at mainbus0 acpi0: using Intel ACPI CA subsystem version 20040211 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: found ECDT, GPE 3 acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present ACPI Object Type 'Processor' (0x0c) at acpi0 not configured acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button PNP0A08 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C0F at acpi0 not configured PNP0C01 at acpi0 not configured PNP0C02 at acpi0 not configured PNP0000 at acpi0 not configured PNP0100 at acpi0 not configured PNP0200 at acpi0 not configured PNP0800 at acpi0 not configured PNP0C04 at acpi0 not configured PNP0B00 at acpi0 not configured PNP0303 at acpi0 not configured IBM3780 at acpi0 not configured acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller acpiec0: io 0x62,0x66 ACPI Object Type 'Power' (0x0b) at acpi0 not configured acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method) acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter IBM0068 at acpi0 not configured acpitz0 at acpi0: ACPI Thermal Zone acpitz0: unable to get polling interval; using default of 30.0s acpitz0: passive cooling mode only acpitz0: critical 99.0C passive 51.0C pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: ATI Technologies product 0x5a31 (rev. 0x01) ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x5a3f (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 5 function 0: ATI Technologies product 0x5a62 (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 4 function 0: ATI Technologies product 0x5a36 (rev. 0x00) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci2 dev 0 function 0: Broadcom BCM5751F Gigabit Ethernet bge0: interrupting at irq 11 bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 bge0: ASIC unknown BCM575x family (0x4201), Ethernet address 00:0a:e4:c6:bc:6d bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb2 at pci0 dev 6 function 0: ATI Technologies product 0x5a38 (rev. 0x00) pci3 at ppb2 bus 3 pci3: no spaces enabled! ohci0 at pci0 dev 19 function 0: ATI Technologies SB400 USB Host Controller (rev. 0x00) ohci0: interrupting at irq 11 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1 at pci0 dev 19 function 1: ATI Technologies SB400 USB Host Controller (rev. 0x00) ohci1: interrupting at irq 11 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0 at pci0 dev 19 function 2: ATI Technologies product 0x4373 (rev. 0x00) ehci0: interrupting at irq 11 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 4 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: ATI Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: single transaction translator uhub2: 8 ports with 8 removable, self powered ATI Technologies product 0x4372 (SMBus serial bus, revision 0x11) at pci0 dev 20 function 0 not configured ixpide0 at pci0 dev 20 function 1 ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide0: bus-master DMA support present ixpide0: primary channel configured to compatibility mode ixpide0: primary channel interrupting at irq 14 atabus0 at ixpide0 channel 0 ixpide0: secondary channel configured to compatibility mode ixpide0: secondary channel interrupting at irq 15 atabus1 at ixpide0 channel 1 pcib0 at pci0 dev 20 function 3 pcib0: ATI Technologies product 0x4377 (rev. 0x00) ppb3 at pci0 dev 20 function 4: ATI Technologies product 0x4371 (rev. 0x00) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled cbb0 at pci4 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00) cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 6 device 0 pcmcia0 at cardslot0 auixp0 at pci0 dev 20 function 5: ATI Technologies IXP AC'97 Audio Controller (rev. 0x02) auixp0: interrupting at irq 11 auixp0: could reset aclink isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug 'n Play devices found auixp0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo auixp0: ac97: ext id 601 WARNING: Callback scheduled before sysmon task queue thread present. auixp0: ac97: CXT35 codec; no 3D stereo audio0 at auixp0: full duplex, mmap, independent audio1 at auixp0: full duplex, mmap, independent Kernelized RAIDframe activated wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) umass0 at uhub2 port 3 configuration 1 interface 0 umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 250 MB, 250 cyl, 64 head, 32 sec, 512 bytes/sect x 512000 sectors sd0(umass0:0:0:0): no door lock sd0: fabricating a geometry bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe bge0: block failed to stop: reg 0x1400, bit 0x00000002 bge0: PCI-Express DMA setting 0x76180000, expected 0x76180000 dma read modebits: set 575x tso bit: 0x 80203fe dma read modebits: 0x 80203fe